Products
3.3~36KV High-voltage power distribution panel lockout

Specification

This product is suitable 3φ3W 60HZ 161KV below the house ground / ungrounded systems in / outdoor high voltage distribution.

The general design, manufacturing, testing and operating requirements of the electrical plate.

according to standard regulations and deliberate

  1. China National Standard (CNS 3990 C4130).
  2. Taiwan Power Company premises wiring system rules.
  3. The United States Motor Manufacturing Association standards (NEMA).
  4. The United States National Industrial Standard (ANSI).
  5. US National Electrical Code (NEC).

Pplicable

An altitude of 1000 meters below normal conditions, the temperature inside the house Week 40 ℃ to -5 ℃, 40 ℃ temperature outside week to -25 ℃, Determination of an average value of 24 hours or less 35 ℃; relative humidity range of 45 to 85%.

Characteristic

With the use of floor space needs to be designed with the customer specifications, the process to show meticulous planning and strict quality control, attention to safety first, to maintain supremacy, simple, neat appearance, durable as the ultimate goal.

3.3~36KV Latching high voltage power distribution

protection structure

  • General user : house type, outdoor type.
  • Special environment users : Dust-proof, drip-proof, anti-corrosion type.
  • House type : if there is no specified protective structure, belong to this type.
  • Housedoor type : under normal use state, which are installed in the outdoor.
  • Dust-proof structure on : special consideration can have a place in the dust of the user.
  • drip type : special consideration can be very leaky users on construction sites.
  • Special consideration premises contain harmful corrosive acid gases on : corrosion type structure.

IP Protection class

The first number Dust-proof The second number Waterproof
0 Unprotected 0 Unprotected
1 Above the protective 50mm diameter solid 1 Protection of water droplets falling vertically
2 Above the protective 12mm diameter solid 2 When the box is inclined 15 °, protection of water droplets falling vertically.
3 Protection of 2.5mm diameter above solid 3 Protection to 60 ° angle from both sides of the vertical line spilled water.
4 Protection 1.0mm diameter above the solid 4 Protection from every direction aligned cabinet splash.
5 Protective dust 5 Protection from every direction aligned with housing low-pressure spray.
6 Dust closed 6 Protection from every direction aligned with the cabinet high pressure water jet.
- - 7 Protection invasion in 1.5cm ~ 1m deep water for 30 minutes.
- - 8 Water intrusion protection for a long time.

Rated

Rated USE Voltage KV 3.3 6.6 11.4 22.8
Rated Duty Cycle HZ 50/60
Rated current A 400
600
400
600
600
1200
600
1200
1200
2000
1200
2000
2000 -
Busbar rated current A 600 1000 1200 1600 2000
Note : rated voltage 33KV level can use the system for

Shape and size

Size
mm
House Outdoors
3.3KV
6.6KV
11.4KV 22.8KV 3.3KV
6.6KV
11.4KV 22.8KV
W 800 1000 1000 1200 1200 800 1000 1000 1200 1200
H 2100 2350 2350 2600 2350 2600 2350 2550 2350 2600 2350 2600
D 1200 1500 1800 1200 1500 1800 1500 1800 2000 1200 1500 1800 1500 1800 2000 1500 1800 2000
Note : Dimensions can be placed according to the
actual place to make the appropriate changes.

Product photos

401 terms Original manufacturer of high-voltage switch board/panel
ISO / IEC 17025 laboratory. TAF switchboard testing laboratory
ISO 9001 Quality System
ISO 14001 Environmental Management
OHSAS 18001 Occupational Health and Safety Management
High voltage switch board type testing. Low-voltage distribution board approval test
MCC motor control center type testing
TIEAN ELECTRICAL ENGINEERING CO., LTD.
Address / No,277-1, Fengren Rd., Renwu Dist., Kaohsiung City 814, Taiwan (R.O.C.) VAT number / 22839868
Tel / 886-7-3720028 fax / 886-7-3716381 e-mail : [email protected] / [email protected]