Products
MCC Low Voltage Motor Power Center

basis and taking into account any standards and regulations

  1. Chinese National Standard (CNS 3989 C1044).
  2. Taiwan Power Company line means the house rules.

low-voltage motor control center plate is a combination of one or more units closed box from the disc have a common horizontal or vertical busbars and integrated motor control unit group, widely used in factories and various public facilities, such as iron and steel centralized control and management of low-voltage plants, petrochemical plants, cement plants, fiber paper and pulp mills, buildings, Memorial, gas and water supply and drainage facilities, highways, etc. ...... motor group and low-voltage power distribution group. On electrical safety, simplicity and interchangeability on the installation and easy maintenance are thoughtful, able to promote engineering efficiency and reliable continuous operation equipment.

Features

  • Box are made high-quality steel plate, structural frames are made of single-sided type MCC SPHC 2.3t, double-sided type MCC structure frame with SPHC 3.2t, side cover is 1.6t, the remaining steel using 2.0t. Lifting beam to 6t * 50 * 50, base trough iron 5t * 50 * 100 * 50 or SUS304 2.0t / 1.5t above stainless steel plate, after computer processing punch welding group legislature and powder coating paint.
  • Easy to install, high interchangeability, fast delivery; each unit has a cam groove, so that the connector unit and extract it easily.
  • Out of each unit of its own independent agency, it is embedded in the vertical bus, easy maintenance and safety inspections indecent replacement.
  • MCCB can be installed operating safety device to prevent the handle in the ON position was mistakenly box door, and the handle lock, avoid outsiders improper operation or shock hazard.
  • Half Pulling Pulling MCC MCC and full Jieke flexible planning application, also provided the lighting, distribution boards, switch, PLC unit, small transformers and other equipment.

standard house type MCC cabinet

Size mm 1 plate 2 plate 3 plate
Single-sided house 630W
2350H
500D
1230W
2350H
500D
1830W
2350H
500D
Single-sided house 630W
2350H
550D
1230W
2350H
550D
1830W
2350H
550D
Double-sided house 630W
2350H
700D
1230W
2350H
700D
1830W
2350H
700D
Note : Outdoor Type Dimensions about by: 30W, 300H, 320D.

Product photos

401 terms Original manufacturer of high-voltage switch board/panel
ISO / IEC 17025 laboratory. TAF switchboard testing laboratory
ISO 9001 Quality System
ISO 14001 Environmental Management
OHSAS 18001 Occupational Health and Safety Management
High voltage switch board type testing. Low-voltage distribution board approval test
MCC motor control center type testing
TIEAN ELECTRICAL ENGINEERING CO., LTD.
Address / No,277-1, Fengren Rd., Renwu Dist., Kaohsiung City 814, Taiwan (R.O.C.) VAT number / 22839868
Tel / 886-7-3720028 fax / 886-7-3716381 e-mail : [email protected] / [email protected]